Modeling of Mixing Time for Bioreactors with Self-Inducing Impellers

Main Article Content

Alaa K. M.

Abstract

        the mixing time is one of the most useful criterions for characterization of the broths mixing intensity and for scaling up of biosynthesis processes. this parameter value depends mainly on the presence of biomass in the broths, mixing system characteristics and operating conditions. For quantifying the influence of these factors on mixing efficiency, this study was carried out for simulated fermentation aerated broths consisted of carboxymethyl cellulose sodium salt (CMCNa) taking into account the broth's viscosity, rotation speed (rpm) and the stirrer geometry.  The experimental results were used in obtaining a correlation to calculate the mixing time for Re <5000, domain of flow regime for which only few data are available from literature.


this model offer a good concordance with the experimental results, the average deviation being of 6.6% for CMCNa solutions and can be used for fermentation scaling up.

Article Details

How to Cite
1.
Modeling of Mixing Time for Bioreactors with Self-Inducing Impellers . Baghdad Sci.J [Internet]. 2008 Dec. 7 [cited 2024 Dec. 19];5(4):569-76. Available from: https://bsj.uobaghdad.edu.iq/index.php/BSJ/article/view/11876
Section
article

How to Cite

1.
Modeling of Mixing Time for Bioreactors with Self-Inducing Impellers . Baghdad Sci.J [Internet]. 2008 Dec. 7 [cited 2024 Dec. 19];5(4):569-76. Available from: https://bsj.uobaghdad.edu.iq/index.php/BSJ/article/view/11876

References

- Patil, S. S. and Joshi, J. B. 2003. Optimum Design Of Multiple Impeller Self- Inducing System. Ind. Eng. Chem. Res., 42 (6): 1261- 1265.

- Ashwin, W.; Patwardhan, and Jyeshtharaj , B . 1997 Hydrodynamics of a stirred Vessel Equipped with a Gas- Inducing Impeller. Ind. Eng.

Chem. Res. 36 (9): 3904-3914.

- Whit, D. A. and Villiers, j. U. 1977. Rate of Induced Aeration in

Agitated Vessels. Chem. Eng. J. 14 (7): 113-118.

- Patel, S. S. and Niteen, A. 2004. Mass Transfer Characteristics of Surface Aerators and Gas- Inducing Impellers. Ind. Eng. Chem. Res. 43 (11): 2765- 2774.

- Martin, G. Q. 1972. Gas Inducing Agitator. Ind. Eng. Chem. Process Des. Dev. 11 (3): 397- 404.

- Saravanan, K. and Mundals, V. D. 1996. Power consumption in Gas Inducing Type Mechanically Agitated Contactors. Ind. Eng. Res.

(4): 2483-2501.

- Patil, S. S. and Joshi, J. B. 1999. Stability of Gas-Inducing Type Impellers. Can. J. Chem. Eng. 77(6) : 793-805

- Forrester, S. E. and Rielly, C. D.1994. Modeling the increased Capacity of Self Inducing Impellers. Chem. Eng. Sci. 49 (4): 5709- 5718.

Similar Articles

You may also start an advanced similarity search for this article.