Effect of using MgO coating with multiple coatings on the optical properties of a five-layer stack
DOI:
https://doi.org/10.21123/bsj.2024.9450Keywords:
Coloured glazing, Facade integration solar systems, Multi-layer coating, Optical interference filter, Thin filmsAbstract
A high refractive index (H) 1.7376 dielectric material MgO was used, and four separate low refractive index (L) dielectric materials, BaF2 (Barium fluoride, 1.4825), Al2O3 (Alumina, 1.5322), GdF3 (Gadolinium Fluoride, 1.59) and LaF3 (Lanthanum Fluoride, 1.6056) were added as optical coatings. Five layers across two designs were used for each option. The first format was Glass/H/L/H/L/H, while the second was Glass/L/H/L/H/L. These were tested using MATLAB to calculate the optical properties (M, Rvis., Rsol., and Tsol.) of the resulting optical coatings were calculated to determine which coating the most efficient for colouring the glass of solar systems used as building façades. The results explained, using the first design, just two coatings were efficient with respect to colouration, with MgO+BaF2 being the most efficient with values of M=8.25 and Rvis=38.2 The MgO+Al2O3 coating was the next most efficient, with values of M=6.12 and Rvis=31.24, the required values for the merit factor (M) and Rvis. which make the coating efficient for colouration are 6% and 12%, respectively. Further, in this case, only one sharp and regular reflection peak of colouration in the visible region was observed. In the first design the refractive index was found to be inversely proportional to the optical properties of the coating, and thus to the colour efficiency of the coating: the MgO+BaF2 coating was thus deemed more efficient than the MgO+Al2O3 coating. The second design was considered inefficient for colouration for all four coatings, as none of these met the required values for (M) and Rvis .
Received 25/09/2023
Revised 12/02/2024
Accepted 14/02/2024
Published Online First 20/02/2024
References
Basher MK, Nur-E-Alam M, Rahman MM, Hinckley S, Alameh K. Design, development, and characterization of highly efficient colored photovoltaic module for sustainable buildings applications. Sustainability. 2022; 14(7): 4278. https://doi.org/10.3390/su14074278
Xiang C, Matusiak BS, editors. Facade Integrated Photovoltaic, state of the art of Experimental Methodology. IOP Conf Ser Earth Environ Sci. 2019; 352: 012062; IOP Publishing; https://doi.org/10.1088/1755-1315/352/1/012062
Costanzo V, Yao R, Essah E, Shao L, Shahrestani M Oliveira A. A method of strategic evaluation of energy performance of Building Integrated Photovoltaic in the urban context. J Clean Prod. 2018; 184: 82-91; https://doi.org/10.1016/j.jclepro.2018.02.139
Habets R, Vroon Z, Erich B, Meulendijks N, Mann D, Buskens P, editors. Structural color coatings for high performance BIPV. Conf. Ser. Earth Environ. Sci. 2021; 855: 1-5; IOP Publishing; https://doi.org/10.1088/1755-1315/855/1/012011
Mahdi HA, AL-Joboory HNS, Abdula AG, Hameed AA, Rasheed AK. Design and Performance Investigation of a Solar-Powered Biological Greywater Treatment System in the Iraqi Climate. Baghdad Sci J. 2022; 19(3): 0670; https://doi.org/10.21123/bsj.2022.19.3.0670
Mahmood YH, Majeed MA. Design of a Simple Dust Removal System for a Solar Street Light System. Baghdad Sci J. 2022; 19(5): 1123. https://doi.org/10.21123/bsj.2022.6467
Agathokleous R, Barone G, Buonomano A, Forzano C, Kalogirou SA Palombo A. Building façade integrated solar thermal collectors for air heating: experimentation, modelling and applications. Appl Energy. 2019; 239: 658-679. https://doi.org/10.1016/j.apenergy.2019.01.020
Eder G, Peharz G, Trattnig R, Bonomo P, Saretta E, Frontini F, et al. Coloured bipv: Market, research and development. IEA Photovoltaic Power Systems Programme. Report IEA-PVPS T15-07. 2019.
Xiang C, Matusiak BS, Røyset A, Kolås T. Pixelization approach for façade integrated coloured photovoltaics-with architectural proposals in city context of Trondheim, Norway. J Sol. Energy. 2021; 224: 1222-1246; https://doi.org/10.1016/j.solener.2021.06.079
Jolissaint N, Hanbali R, Hadorn J-C, Schüler A. Colored solar façades for buildings. Energy Procedia. 2017; 122: 175-180. https://doi.org/10.1016/j.egypro.2017.07.340
Meng L, Zhang Y, Wan X, Li C, Zhang X, Wang Y, et al. Organic and solution-processed tandem solar cells with 17.3% efficiency. Science. 2018; 361(6407): 1094-1098; https://doi.org/10.1126/science.aat2612
Røyset A, Kolås T, Jelle BP. Coloured building integrated photovoltaics: Influence on energy efficiency. Energy Build. 2020; 208: 109623; https://doi.org/10.1016/j.enbuild.2019.109623
Chen T, Lau S, Zhang J, Xue X, Lau S, Khoo Y. A design-driven approach to integrate high-performance photovoltaics devices on the building façade. IOP Conf Ser Earth Environ Sci. 2019; 294: 1-7. IOP Publishing: 012030; https://doi.org/10.1088/1755-1315/294/1/012030
Debbarma M, Pala NA, Kumar M, Bussmann RW.Traditional knowledge of medicinal plants in tribes of Tripura in northeast, India. Afr J Tradit Complement Altern Med 2017; 14(4): 156-168. https://doi.org/10.21010/ajtcam.v14i4.19
Saretta E, Caputo P, Frontini F. A review study about energy renovation of building facades with BIPV in urban environment. Sustain. Cities Soc. 2019; 44: 343-355; https://doi.org/10.1016/j.scs.2018.10.002
Afkhami Z, Iezzi B, Hoelzle D, Shtein M, Barton K. Electrohydrodynamic Jet Printing of One‐Dimensional Photonic Crystals: Part I—An Empirical Model for Multi‐Material Multi‐Layer Fabrication. Adv Mater Technol. 2020; 5(10): 2000386; https://doi.org/10.1002/admt.202000386
Macleod HA. Thin-film optical filters. CRC press. 5th Edition 2017; 696P, Boca Raton. https://doi.org/10.1201/b21960
Mansoor M, Zaman S, Ali L, Khan S. Design of three-layer antireflection coating for high reflection index lead chalcogenide. Mater Res. 2019; 22. https://doi.org/10.1590/1980-5373-MR-2018-0534
Keskar D, Survase S, Thakurdesai M. Reflectivity simulation by using transfer matrix method. J Phys Conf Ser. 2021; 012051. https://doi.org/10.1088/1742-6596/1913/1/012051
Garlisi C, Trepci E, Li X, Al Sakkaf R, Al-Ali K, Nogueira RP, et al. Multilayer thin film structures for multifunctional glass: Self-cleaning, antireflective and energy-saving properties. Appl Energy. 2020; 264: 114697. https://doi.org/10.1016/j.apenergy.2020.114697
Hameed MM, Al-Samarai A-ME, Aadim KA. Synthesis and characterization of gallium oxide nanoparticles using pulsed laser deposition. Iraqi J Sci. 2020; 2582-2589; https://doi.org/10.24996/ijs.2020.61.10.14
Schüler A, Roecker C, Boudaden J, Oelhafen P, Scartezzini J-L. Potential of quarterwave interference stacks for colored thermal solar collectors. Sol Energy. 2005; 79(2): 122-130. https://doi.org/10.1016/j.solener.2004.12.008
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Baghdad Science Journal
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
